Pianos consistently make movers yearly list of items that are most frequently harmed. Grand pianos are specifically troublesome. Practicing the following procedures for taking apart, padding and packing grand pianos will prevent damage, lower claims expense, and improve customer satisfaction.
1) A minimum of three people are required to manage a child grand piano. If the infant grand piano needs to increase or down stairs or if a full or performance grand piano requires to be carried, a minimum of four individuals are needed.
2) Always finish a extensive and precise inventory. It might be preferable or essential to use a visual stock to properly describe and reveal pre-existing damage.
3) As various parts are dismantled, please place all hardware in an effectively labeled parts bag and after that put the parts bag in a "Components Box".
4) Remove the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a tidy furnishings pad.
5) Detach the cover by removing the hinge pins. Have one individual wiggle the cover, holding it opposite the hinge, while a second person works the pin loose. Please take care not to damage the wood with the pliers or with the pin itself. Cover the jaws of the pliers with a small fabric to assist avoid damage to the wood if necessary. Wrap the lid in a clean furniture pad.
6) Remove the prop that holds the lid open and cover it in a clean furniture pad. The prop has a hinge pin and is in two pieces.
7) Eliminate the pedal assembly and wrap it in a tidy furnishings pad. The braces at the back of the assembly rest in slots at each end. When eliminating the screws, please take care not to drop the braces. In addition, please be particularly cautious with the push-rods so that they will not get bent. As you deal with the piano, number the push-rods from delegated right as "1", "2", and "3", by putting a piece of masking tape with the appropriate number on each rod. Note: If masking tape is not available, please usage correctly labeled parts bags for this purpose. When reassembling at location, please make certain to put the rods in the right order so that the pedals will work correctly.
8) Pad the piano by official site positioning a tidy rolled furniture pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to prevent it from flopping open while you manage the piano. Cover the top of the piano with 2 clean furnishings pads, neatly folded around the keyboard. Use rubber bands to protect the pads. Note: Please ensure that the surface area of the piano is dust-free before padding it. Padding a highly sleek surface that is dusty might cause great scratches, especially on a black lacquer surface.
9) Position a piano board and attach the straps so that it is all set to get the piano. The raised brace on the piano board should be at the keyboard end of the piano.
10) Eliminate the left front leg by positioning one individual beneath the piano at the left end of the keyboard. Be sure to have 2 people lifting the corner of the piano while the 3rd person removes the leg. Keep in mind: Please be sure to note which legs were removed from which positions since some pianos have legs that are not interchangeable.
11) Place the piano on the piano board by decreasing the "leg-less" end onto the board. Please make sure to raise the entire piano a little while completing this maneuver to prevent excessive pressure on the remaining, connected legs as the piano suggestions. Raise the piano my review here to an upright position on the board. Note: Please make sure that the soundboard is protected before raising. Make certain that the piano is centered comfortably against the brace at the end of the piano board. Note: Never ever leave the piano unattended. Constantly have at least one person holding the piano consistent at all times.
12) Eliminate the 2 staying legs and cover them in clean furniture pads. These legs are held in place by a "essential and slot" plan. To get rid of the leg, slide it look at this site inward toward the center of the piano until it comes out of the slot.
13) Secure the piano to the piano board by bringing completions of the straps together and fastening them. Place folded burlap pads over the furniture pads but under the straps to provide additional protection to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, tie the loose ends of the two straps together.
14) To move the piano over a flat, level surface area, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, use the piano board as a skid. After sufficiently padding the stairs for defense versus home damage, put the keyboard end of the piano toward the bottom of the stairs. Attach a bulge strap to the top end of the piano board to avoid the piano from slipping.
16) To pack the piano, leave it on the piano board and place it in a tier as the first base item with the keyboard dealing with the wall of the preceding tier. The finest place to pack the padded lid is in between the piano and the preceding tier or in between the piano and the wall.
Grand pianos represent a considerable challenge, they can be moved without damage by utilizing common sense and practicing the treatments listed above.